Table of Contents
Advertisement
If you are using an external 5 1/4-inch diskette
DIP switch 2 on the back panel off, your computer recognizes the
external diskette drive as A and the internal drive as B. In this case,
you need to confirm or adjust the setup settings for both
and
Drive B.
setup main menu, you may see the following display:
Drive B(internal): None (BAD SETTING)
Drive C
******* SAVE SETTINGS ********
Do not be concerned about the message
merely to remind you to adjust the settings for both of your diskette
drives.
When you have entered the correct setup information for both
diskette drives, highlight
main setup menu reappears.
2-8
Running the Setup Program
When you first select
Memory
Display
Coprocessor
Mass storage
Backlight period
Gray scale
: Type 2(20MB)
SAVE
drive
Mass storage from the
Exit
BAD
SETTING
and press
SETTINGS
and have set
Drive A
. This is
Enter.
The
Advertisement
Table of Contents
