Table of Contents
Advertisement
STORAGE
Elite Inversion System
The
Elite Inversion System
your
STEP 1:
LOCKING KNOB(36)
Loosen
SPRING PIN(35).
Now, slide the
BEAM(10)
MAIN FRAME(
into the
adjustment hole. Refer to illustration 1.
STEP 2:
Remove the
ADJUSTMENT BARS(85).
down to about the same place as the Rear Frame and lock in
position by inserting the
adjustment holes in the
SUPPORT SLEEVE(84).
above the
STEP 3:
Remove the
REAR FRAMES(2, 3).
Rear Frame as Illustration 3 shows. Insert the
PINS(46)
back into the
Elite Inversion System
WARNING:
When folding and unfolding the
Elite Inversion System
2.
MAINTENANCE
The safety level of the
damage and wear.
1.
Check the angle adjustment tube, traction bars, ball pins, pivot arms, cushion bed, heel holders, foam
pads, spring pin, and warning label for damage and wear.
2.
Replace damaged and worn components immediately and/or keep the equipment out of use until repairs
are complete.
is designed to fold for easy storage. You can store
as illustrated. Please follow the following process:
HEIGHT ADJUSTMENT
)
92
and lock in the lowest
PULL PINS(86)
from the
NYLON BED(37)
Swing the
PULL PINS(86)
ANGEL ADJUSTMENT BARS(85)
Refer to illustration 2.
LONG BALL PINS(46)
Fold the Front Frame close to the
REAR FRAMES(2, 3)
in the folded position.
and make sure your hands are clear of any folding or pinch point.
Insert the PULL PINS(86)
into the second
adjustment holes.
Elite Inversion System
and pull out the
ANGLE
into the second
from the
LONG BALL
to lock the
Elite Inversion System,
3.
can be maintained only if it is examined regularly for
15
Lowest
Adjustment Hole
keep all children away from the
1.
Advertisement
Table of Contents
