Table of Contents
Advertisement
3-9 Leather case usage
Optional
Open the leather case
Close the Velcro and stick the
cover.
12
Place the printer into the leather
case
1 2
3 4
Fasten to the belt by using the clip
at the rear of the leather case
3-10 Self Test
Turn off the power pressing the
power button for approximately
3 seconds.
1 2
3
1. To print ASCII pattern additionally,
2. After printing ASCII pattern, the
3. If the Feed button is not pressed
The printout is produced.
While you are pressing the FEED
button, press the power button
NOTE
press the Feed button once more
self test will be finished automatically.
to print ASCII pattern, self test will
be finished automatically after
30 seconds.
13
Advertisement
Table of Contents
Need help?
Do you have a question about the STm.58b and is the answer not in the manual?
Questions and answers