Picture Profiles; Registering The Customized Settings As A Picture Profile; Selecting A Picture Profile - Sony PMW-EX3 Operating Instructions Manual

Picture Profiles

You can customize the picture quality, depending
on the conditions or circumstances of recording,
and store them as a picture profile, enabling the
picture quality to be resumed just by your
selecting the picture profile.
Six different picture profiles (PP1 to PP6) can be
stored in memory.
The same standard (reference) values are
registered to six picture profiles at the factory as
those specified for the Picture Profile Off status.
The PICTURE PROFILE menu is available for
picture-profile operations.
Note
The picture profiles can be operated only in
Camera mode. They cannot be operated in Media
mode.
When the RM-B750/B150 Remote Control Unit
is connected, PP6 is automatically selected and
the picture profiles can be adjusted from the RM-
B750/B150.
For details, see "Operating From the RM-B750/
B150" on page 140.
Registering the Customized
Settings as a Picture Profile
16 :9 W
ID E SC
RE EN
OF F
ON
PICTURE
PROFILE
PICTURE
PROFILE
button
88 Picture Profiles
2
1
-
FU LL
AU TO
FR AM
E
+
GA IN
WH ITE
BA L
L
BA RS
M ATW /CA M
H
B
A
PR ST
ST AT
US
ME NU
SE L/S
ET
CA NC
EL
CAMERA OFF MEDIA
Power switch:
CAMERA
1
Set the power switch to CAMERA to
turn the camcorder on in Camera
mode.
2
Press the PICTURE PROFILE button.
The PICTURE PROFILE menu is displayed.
3
Operating the jog dial or the joystick,
select "SEL" from the PICTURE
PROFILE menu then select the picture
profile number (PP1 to PP6) to operate.
PICTURE PROFILE
OFF
SEL
PP1: STANDARD
SET
PP2: STANDARD
PP3: STANDARD
PP4: STANDARD
PP5: STANDARD
PP6: STANDARD
4
Operating the jog dial or the joystick,
select "SET" and make the settings of
the picture profile items.
PICTURE PROFILE
PP1: STANDARD
SEL
SET
Pr o f i l e Name
Mat r i x
Color Correct i on
Whi te
Detai l
For details on the setting items, see "Picture
Profile Items" on page 90.
5
When the settings are completed, press
the PICTURE PROFILE button to exit
the menu.

Selecting a Picture Profile

Selecting a Picture Profile using the
PICTURE PROFILE menu
Once you store a picture profile, you can call the
picture quality registered in the picture profile as
follows:
1
Set the power switch to CAMERA to
turn the camcorder on in Camera
mode.
2
Press the PICTURE PROFILE button.
B
B
B
B
B