Lcd/Vf Set Menu - Sony PMW-F3K Operating Instructions Manual

VIDEO SET
Menu items
S-Log LUT
Select
Setting the MLUT
for S-Log output
S-Log EI Mode
Setting EI mode
for S-Log output
S-Log EI
Select
Setting the EI
MLUT for S-Log
output
SDI Rec
Control
Setting the
synchronized
recording

LCD/VF SET Menu

LCD/VF SET
Menu items
LCD
Adjusting the LCD
monitor
118 Setup Menu List
Setting values
Off /
P1: 709 (800%) /
P2: HG8009G40 /
P3: HG8009G33 /
P4: 709 (180%) /
U1: 709 (180%) /
U2: 709 (180%) /
U3: 709 (180%) /
U4: 709 (180%) /
U5: 709 (180%)
Off / On
800EI /
1000EI /
1250EI /
1600EI /
2000EI /
2500EI /
3200EI
Off / HD SDI Remote I/F /
Synchro Rec
Subitems and setting values Contents
Color
–99 to +99 (±0)
Contrast
–99 to +99 (±0)
Brightness
–99 to +99 (±0)
Contents
Select the MLUT (Monitor Look Up Table) to be applied to
the video signals with S-Log except for the signals of Dual-
Link output (signals recorded on the camcorder, and signals
output from the SDI output, HDMI output, Video output, and
i-LINK output)
Off: MLUT not applied (original S-Log is output)
709 (800%): Gamma 709 with 800% dynamic range
HG8009G40: Hypergamma with 800% dynamic range
HG8009G33: Hypergamma with 800% dynamic range
709 (180%): Gamma 709 with 800% dynamic range
Turn EI mode for S-Log output on/off.
When S-Log output is in EI mode, select EI MLUT (gain) to
be applied to images (for internal recording on the camcorder,
SDI output, HDMI output, video output, i-Link output) other
than that for dual-link output.
800EI: Equivalent to 0 dB gain
1000EI: Equivalent to 2 dB gain
1250EI: Equivalent to 4 dB gain
1600EI: Equivalent to 6 dB gain
2000EI: Equivalent to 8 dB gain
2500EI: Equivalent to 10 dB gain
3200EI: Equivalent to 12 dB gain
To turn the function to enabling recording synchronized with
this camcorder.
HD SDI Remote I/F: To feed a REC trigger signal to a
recorder connected to the SDI OUT and HD SDI A/B
connectors.
Synchro Rec: To synchronize with frame accuracy start and
stop of recording on a device supporting synchronized
recording with the camcorder when it is connected via the
HD SDI A/B connector (not available when it is connected
via the SDI OUT connector).
Adjust the color of pictures on the LCD monitor.
Adjust the contrast of pictures on the LCD monitor.
Adjust the brightness of pictures on the LCD monitor.