Dividing A Clip (Hd Mode Only) - Sony PMW-F3K Operating Instructions Manual

2
Select "SET INDEX PIC" from the Clip
Operation menu.
The information screen of the selected frame
appears and a confirmation message is
displayed below the image.
3
Select "Execute."
Note
Even if you specify a frame other than the top
frame for the index frame, playback always
begins from the top frame when you start it from
the thumbnail screen.

Dividing a Clip (HD Mode Only)

In HD mode, you can divide a clip into two
different clips at the frame you select on the
EXPAND CLIP screen (page 98) or the SHOT
MARK screen (page 99).
1
Select the frame at which the clip is to
be divided on the EXPAND CLIP
screen or the SHOT MARK screen then
press the jog dial.
The Clip Operation menu pops up.
2
Select "DIVIDE CLIP" from the Clip
Operation menu.
The information screen for the selected frame
appears, and a confirmation message is
displayed below the image.
3
Select "Execute."
The selected and subsequent frames are
divided, creating two clips having different
names.
The title block (4 to 46 characters) of the original
clip name is carried on, continuing to the last
number on the memory card by the number (4
digits) of the clip.
Example: If you divide a clip named ABCD0002
into two clips under the condition where a
new clip will be named EFGH0100, clip
ABCD0100 and clip ABCD0101 are created.
Note
If the remaining space on the memory card is
insufficient for divided clips, a message
informing you of it appears.
Clip Operations 101