Sony PMW-F3K Operating Instructions Manual page 18

Connector block
A
MENU SEL/SET CANCEL
A B PICTURE PROFILE
SLOT SELECT ON OFF
DC IN
2
1.
HD SDI A/B (Dual-Link) connectors
(BNC type) (page 136)
2.
DC IN (DC power input) connector
(page 23)
3.
SDI OUT connector (BNC type) (page 135)
4.
VIDEO OUT (analog video output)
connector (BNC type) (page 135)
5.
TC IN (timecode input) connector (BNC
type) (page 143)
6.
TC OUT (timecode output) connector
(BNC type) (page 144)
7.
GENLOCK IN connector (BNC type)
(page 143)
8.
HDMI OUT connector (page 135)
9.
i.LINK (HDV/DV) connector (4-pin, S400
conforming to IEEE1394) (page 139)
10.
USB connector (Mini B) (page 137)
11.
Option connector (USB type A)
The optional CBK-WA01 Wi-Fi Adapter can
be connected.
For connection, refer to the Supplement in the
supplied CD-ROM labeled "Manuals for Solid-
State Memory Camcorder."
For the mounting bracket for the Wi-Fi Adapter
(Part No. 4-410-322-01), contact your Sony
dealer or Sony service representative.
12.
REMOTE connector (8-pin)
An external remote control device, such as
the RM-B150/B750 Remote Control Unit or
18 Parts Identifications
1
HD SDI B
SDI OUT
BATTERY
RELEASE
8
VIDEO OUT
9
TC IN 10
11
TC OUT
12
GENLOCK IN
13
3 4 5 6 7
the RCP-1000/1001 / RCP-1500/1501/1503
Remote Control Panel, can be connected.
For operation from the remote control device,
refer to the Supplement in the supplied CD-
ROM labeled "Manuals for Solid-State Memory
Camcorder."
13.
SPARE connector (10-pin)
When the separately available CBK-3DL01
3D-Link Option is installed, connect another
PMW-F3K/F3L unit here using the 3D-Link
cable supplied with the CBK-3DL01.
For connection, refer to the Supplement in the
supplied CD-ROM labeled "Manuals for Solid-
State Memory Camcorder."
Bottom
1 2
1.
Tripod receptacles
Note
Check that the size of the hole matches the
screw of the tripod. If they do not match, the
camcorder cannot be attached to the tripod
securely.
2.
Backup battery holder (page 147)
3.
Accessory mounting screw hole
Type of screw: 1/4-20UNC, length of
engagement: 10 mm (
Note
Do not apply excessive force to the mounted
accessory. It may damage the screw thread.
3
13
/ inch) or less
32