Lens File Menu - Sony PMW-F3K Operating Instructions Manual

LENS FILE Menu

LENS FILE
Menu items
Information
Displaying the
information for the
attached lens
(serial lenses only)
Operation
Operating lens
files
122 Setup Menu List
Subitems and setting values Contents
Lens Name
Manufacturer
Serial Number
Version
Display Mode
Date&Time / Model Name /
Lens Name
Recall Memory
Execute/Cancel
Store Memory
Execute/Cancel
Recall SxS
Execute/Cancel
Store SxS
Execute/Cancel
File Name
No Offset
File Source
Auto Recall
Off / On (Lens Name) / On
(Serial Number)
The model name of the lens is displayed.
The manufacturer of the lens is displayed.
The serial number of the lens is displayed.
The version of the lens is displayed.
Set the mode of the display for lens file selection.
Date&Time: To display the date and time when the lens files
have been stored.
Model Name: To display the name of the device with which
the lens files have been stored.
Lens Name: To display the name of the lens.
Select "Execute" to retrieve a lens file from the built-in
memory.
Select "Execute" to store a lens file in the built-in memory.
Select "Execute" to retrieve a lens file from an SxS memory
card.
Select "Execute" to store a lens file in an SxS memory card.
Set the filename (max. 16 characters) of the lens file being
selected. Turn the jog dial to select a character then push the
dial to proceed.
Selectable characters: a to z (lower case), A to Z (upper case),
0 to 9, space, and the following characters:
!#$%&'()*+,-./:;<=>@[¥]~
The file number of the file being selected is displayed.
Specify whether to automatically retrieve the lens file for the
that supports serial communication
mounted lens
Off: To not use
On (Lens Name): To retrieve the lens file corresponding to the
model name of the lens and reflect the contents of the file.
On (Serial Number): To retrieve the lens file corresponding to
the model name and serial number of the lens and reflect
the contents of the file. (If the lens does not support serial
number communication, the file corresponding with the
model name is retrieved.)
.