Table of Contents
Advertisement
•
RX Input Power - The measured RX input power.
Viewing Vital Product Data (VPD)
The VPD tab displays vital product data (if available) for the selected FC or FCoE adapter port such as
the product name, part number, serial number and so on.
Note: Not supported on systems using CIM provider v1.2.1 on ESX 3i.
To view VPD information:
1. Select Host or Fabric view.
2. In the discovery tree, select the port or FCoE function whose VPD information you want to view.
3. Select the VPD tab.
Figure 30: VPD tab
VPD Table Definitions
•
Product Name - Product information about the selected adapter port.
•
PN (Part Number) - The adapter's part number.
•
SN (Serial Number) - The adapter's serial number.
•
VO - Vendor unique data. "V" indicates a vendor-specific field. An adapter may have none, one
or more of these fields defined. Valid values for this field are "VO" (the letter "O", not the number
zero) and "Vx" (where "x" is a number).
Note: Some adapters may show additional VPD information such as EC (EC level) and MN
(manufacturer ID).
Viewing Maintenance/Firmware Information
Use the Maintenance or Firmware tabs to view firmware information and update firmware. For Fibre
Channel adapters, you can also configure boot and change WWPN and WWNN information for the
selected adapter port. (Not available in read-only mode.)
The OneCommand Utility User Manual
Page 63
- Quick Links:
- In Windows
Hide quick links:
Advertisement
Table of Contents
