Emulex ProLiant BL620c - G7 Server User Manual page 144

Figure 78: Boot from SAN Configuration dialog box
The Boot from SAN Configuration dialog box varies for each boot type. Figure 78 depicts the
boot from SAN configuration for the x86 type boot.
4. Verify adapter address and boot version to make sure you configure the correct adapter and that
it has the boot code version you want.
5. From the Boot Type menu, select x86, EFIBoot or OpenBoot.
Note: x86 and OpenBoot share the same configuration memory space. You cannot
configure an adapter for both x86 and OpenBoot at the same time. When you select
one of these boot types and the configuration region is configured for the other boot
type, a message appears warning that making changes will overwrite the other boot-
type configuration.
Note: If you have modified the settings for the current boot type and then change to a new
boot type, a message appears telling you to save the current settings before
changing to the new boot type.
6. Check Enable Boot from SAN and set the Topology and Link Speed.
• Topology options are:
• Auto, Loop First (default)
The OneCommand Utility User Manual Page 137