In Linux - Emulex ProLiant BL620c - G7 Server User Manual

In Linux

The following must be installed before you can install the utilities:
• The appropriate driver for your operating system:
• Linux driver version 8.2.0.33.3p or later (For RHEL5 and SLES10 operating systems.)
• Linux driver version 8.2.8.x or later (For SLES11 operating systems.)
• Previous versions of the Linux driver must be uninstalled. You must run the uninstall script that
shipped with the version of the Linux driver you want to remove.
To install the OneCommand Manager application in Linux:
1. Log on as 'root'.
2. Download the utilities from the Emulex Web site or copy them to the system from the installation
CD.
3. Copy the installation and uninstallation scripts to a known location, for easy access by other
users.
4. Copy the OneCommand elxocm-<Platform>-<AppsRev>.tgz file to a directory on the install
machine.
5. Change (use cd command) to the directory to which you copied the tar file.
6. Untar the file.
• For RHEL 5 and SLES 10 type:
tar zxvf elxocm-rhel5-sles10-<apps_ver>-<rel>.tgz
• For SLES 11 type:
tar zxvf elxocm-sles11-<apps_ver>-<rel>.tgz
7. Change (use cd command) to the elxocm directory created in step 6.
• For RHEL 5 and SLES 10 type:
cd elxocm-rhel5-sles10-<apps_ver>-<rel>
• For SLES 11 type:
cd elxocm-sles11-<apps_ver>-<rel>
8. Uninstall any previously installed versions. Type:
./uninstall.sh
9. Run the install script. Type:
./install.sh
10. Enter the type of management you want to use:
1 Local Mode
clients on this Platform Only.
2 Managed Mode: HBA's on this Platform can be managed by local or
remote OneCommand clients.
3 Remote Mode : Same as '2' plus OneCommand clients on this Platform
can manage local and remote HBA's.
11. If you answered <2> or <3> in step 10, you are asked if you want the OneCommand Manager
application to operate in read-only mode. Read-only mode prevents users from performing
certain operations such as resetting adapters, updating an adapter's firmware and changing
adapter driver properties and bindings. It only affects the local OneCommand Manager
interface. These operations can still be performed using remote management. Enter <y> for yes
to allow the user to perform these operations, enter <n> for no if read-only mode is desired.
The OneCommand Utility User Manual
: HBA's on this Platform can be managed by OneCommand
Page 5