Emulex ProLiant BL620c - G7 Server User Manual page 179

DcbxState, DcbxMode, TxState, RxState, TxPortDesc, TxSysDesc, TxSysName, TxSysCap,
PgEnable, PgWilling, PgAdvertise, PfcEnable, PfcWilling, PfcAdvertise, TlvEnable, TlvWilling,
and TlvAdvertise.
4. Defaults - sets all CNA CEE params to their default values.
For example: SetCEEParam <WWPN|MAC> defaults
Parameters:
WWPN - World Wide Port Name of the adapter.
MAC - MAC address of the NIC or iSCSI port.
Param - Parameter Name.
LP-21000-M and LP21002-M parameters:
Pausetype - 1 = Standard, 2 = Per Pause Priority
pfcflag - 0 = Clear, 1= Set
pfcpriority - (0-0xff)
fcoepriority - (0-7)
fcoeformat - (0 or 0x10000)
Uifporttype - 1 = Access, 2 = Trunk
OneConnect adapter parameters:
DCBXState - 1 = enabled 0 = disabled
DCBXMode - 1 = CEE, 0 = CIN
PFCEnable - 1 = enabled, 0 = disabled
PFCWilling - 1 = enabled, 0 = disabled
PFCAdvertise - 1 = enabled, 0 = disabled
PGEnable - 1 = enabled, 0 = disabled
PGWilling - 1 = enabled, 0 = disabled
PGAdvertise - 1 = enabled, 0 = disabled
FCoEPGID - (0-7)
FCoEPriority - (0-7) [only for FCoE adapters]
iSCSIPriority - (0-7) [only for iSCSI adapters]
PFCPriorities - Comma separated list of up to 7 values ranging from 0-7. For example: 0,3,6
LLDP settings:
TxState - 1 = enabled, 0 = disabled
RxState - 1 = enabled, 0 = disabled
TxPortDesc - 1 = enabled, 0 = disabled
TxSysDesc - 1 = enabled, 0 = disabled
TxSysName - 1 = enabled, 0 = disabled
TxSysCap - 1 = enabled, 0 = disabled
Value - Parameter Value.
The OneCommand Utility User Manual Page 172