Emulex ProLiant BL620c - G7 Server User Manual page 102

4. Configure the settings you want and click OK.
Figure 50: Configure CEE dialog box for iSCSI adapter ports (DCBX enabled)
Configure CEE Dialog Box Field Definitions
DCBX Settings Area
• Enabled - DCBX can be enabled or disabled. With DCBX enabled, the configured values are
used only if the switch does not provide them. With DCBX disabled, the configured values are
used. Changes to the DCBX state require a reboot of the host.
• DCBX Mode - The DCBX mode can be set to CEE or CIN. Changes to the DCBX mode require
a reboot of the host.
• Operating Version - The operating version of the DCBX protocol. The system adjusts as needed
to operate at the highest version supported by both link partners. This setting cannot be
changed.
• Maximum Version - The highest DCBX protocol version supported by the system. Version
numbers start at zero. The DCBX protocol must be backward compatible with all previous
versions. This setting cannot be changed.
LLDP Settings Area
• Transmit Enabled - LLDP Transmit can be enabled or disabled.
• Transmit Port Description Enabled - Provides a description of the port in an alpha-numeric
format. The value equals the ifDescr object, if the LAN device supports RFC 2863.
The OneCommand Utility User Manual Page 95