Viewing Adapter Information; Viewing Fibre Channel Adapter Information - Emulex ProLiant BL620c - G7 Server User Manual

• CIM Provider Version - If the host is being managed using the CIM interface, the "CIM Provider
Version" field will display the version of the Emulex CIM provider that is running on the remotely
managed system.
Note: The CIM Provider Version field only appears if the host is managed through the CIM
interface.

Viewing Adapter Information

The adapter information that is displayed depends upon the type of adapter you select, Fibre Channel,
iSCSI or NIC-Only.

Viewing Fibre Channel Adapter Information

When you select a Fibre Channel adapter from the discovery-tree, the Adapter Information tab contains
general attributes associated with the selected Fibre Channel adapter.
Note: Not all information is displayed on systems using CIM provider v1.2.1 on ESX 3i.
To view Fibre Channel adapter information:
1. Select Host, Fabric or Virtual Ports view.
2. Select a Fibre Channel adapter in the discovery-tree.
Figure 17: Fibre Channel Adapter Information tab
Fibre Channel Adapter Information Field Definitions
• Model - The complete model name of the adapter.
• Serial Number - The manufacturer's serial number for the selected adapter.
• Hardware Version - The board Joint Electron Devices Engineering Council identification (JEDEC
ID) ID version for the selected adapter.
• Device ID - The default device ID for the selected adapter. (Not supported on VMware ESX
servers being managed through the CIM interface.)
• Adapter Temperature - If the adapter's temperature is not available, "Not Supported" is
displayed. (Not supported on VMware ESX servers being managed through the CIM interface.)
If supported by the adapter, this field displays the adapter's temperature and one of the following
temperature-related status messages:
• Normal: The adapter's temperature is within normal operational range.
The OneCommand Utility User Manual Page 43