In Windows; In Solaris Sfs; In Linux - Emulex ProLiant BL620c - G7 Server User Manual

To change management/read-only mode:
Note: You must restart the OneCommand Manager application to see the new management
mode.

In Windows

1. From the File menu, select Management Mode. The Management Mode dialog box appears.
Figure 5: Management Mode dialog box
2. Choose the management type and read-only mode you want.
3. Click OK.

In Solaris SFS

1. Run the following script:
/opt/HBAnyware/set_operating_mode
2. Choose the management type and read-only mode you want.

In Linux

1. Stop the OneCommand Manager application.
2. Run the following script:
/usr/sbin/hbanyware/set_operating_mode
3. Choose the management type and read-only mode you want. Enter <y> for yes to allow the user
to perform these operations, enter <n> for no if read-only mode is desired.
The OneCommand Utility User Manual Page 23