Adjusts the range of colors that can be expressed on screen.
color space depending on the input signal, and
allow the user to manually adjust a range of the desired color in the colors of the
Adjusts the color temperature of the picture to make white objects look white and the overall
picture appear natural. Adjust each color's luminosity with the offset menu and the brightness
with the gain menu. To restore the default values, select Reset.
10p White Balance
Adjusts the white balance by adjusting the brightness of the red, green, and blue elements in
10-point intervals. This option is only available when
be supported by some external devices.
Adjusts the primary color intensity.
Displays picture calibration patterns on the screen without using a separate pattern generator or
is used to calibrate the contrast, and
color saturation. If the screen menu disappears or a different menu is activated while the screen
is being calibrated, this option will save the changes up to that point and automatically deactivate
that menu. This feature is enabled in Component and HDMI modes only.
Adjusts the picture brightness depending on the on-screen movements for reduced power
consumption. This feature is only available when
available in 3D mode. In addition, adjusting
applies a range that is wider than the input
automatically adjusts the
is set to
is used for calibrating the color and
is set to
automatically deactivates this
and may not
and is not