Anynet+ (Hdmi-Cec) Setup; Using The Anynet+ (Hdmi-Cec); Switching Between Anynet+ Devices - Samsung PN51F8500AF E-Manual

Anynet+ (HDMI-CEC) Setup

System
Screen Menu >
Enable/disable Anynet+ (HDMI-CEC).
Anynet+ (HDMI-CEC): Enables/disables Anynet+ (HDMI-CEC). Disabling this turns off all
●
Anynet+-related features.
Auto Turn Off: Turns off external devices when the TV is turned off. Some devices do not support
●
this option.
Try Now
Receiver: Listen to audio through an AV receiver instead of the TV speakers. This option is only
●
available when there is an AV receiver connected to the TV.

Using the Anynet+ (HDMI-CEC)

You can operate external devices using just the TV remote panel.

Switching between Anynet+ Devices

11
Select the virtual remote panel's
from the list. A device selection screen will appear.
21
Select a device and wait for the switch to take place. This process may take up to 2 minutes to
complete and cannot be cancelled when started.
"
Alternatively, switch to a different Anynet+ (HDMI-CEC) device by selecting its name from the
However, Anynet+ (HDMI-CEC) cannot be used if a connected input connector is selected.
Anynet+ (HDMI-CEC)
>
Try Now
TOOLS
Try Now
Try Now
button to display the list. Select
Anynet+ (HDMI-CEC)
Source
list.