Wired Network Setup
Screen Menu >
The displayed image may differ depending on the model.
Automatic Wired Network Setup
The TV's wired network connection is automatically configured when it is connected to a network that
The TV attempts to connect to the network. A confirmation message is then shown once a
connection is established. Select
Manual Wired Network Setup
If the network requires a static IP address, enter the IP address, subnet mask, gateway and DNS values
to connect to the network manually. To get the IP address, subnet mask, gateway and DNS values,
contact your Internet Service Provider (ISP). Refer to the "Dynamic versus Static IP Addresses" for
and then select Connect.
to proceed. If the attempt fails, try again or connect