Manual Wireless Network Setup
If the network requires a static IP address, enter the IP address, subnet mask, gateway and DNS values
to connect to the network manually. To get the IP address, subnet mask, gateway and DNS values,
contact your Internet Service Provider (ISP). Refer to the "Dynamic versus Static IP Addresses" for
Select your network type.
Select the network (SSID) you wish to connect to. If the desired wireless router doesn't appear in
the list, select
Enter the security key and select Done. If the selected network is not security-enabled, the TV will
attempt a connection right away.
when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Connection verification cancelled.
Wireless network connection test is stopped.
and enter the network's SSID manually.
automatically displays a list of available wireless networks.
You can connect your TV to the
internet. Please select which
wireless network to use.