Download Print this page

Craftsman 486.245332 Owner's Manual page 11

25 gallon 70 psi sprayer
Hide thumbs Also See for 486.245332:

Advertisement

CUSTOMER
RESPONSIBILITIES
Read and follow the maintenance schedule and the maintenance procedures listed in this section.
F,,,°d e osyou
complete regular service
._
Check for loose fasteners
X
Flush the tank
I X
Cleaning the strainers
X
Lubrication
X
Service
Dates
CHECK
FOR LOOSE
FASTENERS
*
Before each use make a thorough visual check of
the sprayer for any bolts and nuts which may have
loosened
Retighten any loose bolts and nuts
FLUSH THE TANK
*
Remove any solution left in tank. Fifl the sprayer part
way with water, start the sprayer and allow clear water
to be pumped through the plumbing system and out
through the boom assembly and the handgun
Use
the handgun to thoroughly wash all internal parts of
the tank, the outside of the tank and the boom.
Refill the tank about half full with plain water and
a chemical
neutralizer
and repeat the cleaning
instructions
above. Flush the entire sprayer with the
neutralizing
agent.
Follow the chemical
manufacturers
instructions
for disposal
of all wash or rinsing wateL
CLEANING
THE
STRAINERS
At least once a season, clean the strainer in the end
of the intake hose at the bottom of the tank. Remove
the nylon swivel nut from the hose, pull out the screen
and flush it with clear water.
At least once a season,
clean the strainers
in the
boom nozzles
Remove
the nozzle,
pull out the screen
and flush it with clear water.
LUBRICATION
Apply a few drops of oil to the wheel hubs at least
once
a year
STORAGE
RECOMMENDATIONS
*
Drain all water out of the sprayer, paying special
attention to the pump and handgun. These items
are especially prone to damage from chemicals and
freezing weather
*
The sprayer should be winterized before storage by
pumping a 50-50 solution of water and R V. antifreeze
through the entire plumbing
Proper care and
maintenance will prolong the life of the sprayer
IMPORTANT:
Do not allow chemicals to sit in pump for
extended times of idleness. Some chemicals will damage
the pump valve if allowed to soak untreated for a length
of time Always flush the pump with water after each use.
Follow the procedures in the Maintenance section for
flushing and disposal.
11

Advertisement

loading