Installing A Network Driver For Windows Nt; Before Installing The Driver; Installing The Ndis 4 Driver For Windows Nt; Windows Nt 3.51 - 3Com TokenLink Velocity 3C319 User Manual

6-2 C
HAPTER

Before Installing the Driver

Before installing the driver, make sure that Windows NT
is installed and that the following procedures have
been completed:
Windows NT versions 3.51 and 4.0 are not PnP-enabled.
If your network environment uses the TCP/IP
communications protocol, you must obtain from
your network administrator all the information you
will need to define an IP address during the
installation process.

Installing the NDIS 4 Driver for Windows NT

This section describes installing the 3C319 NIC NDIS 4
driver for the following Microsoft Windows NT versions:

Windows NT 3.51

Follow these steps to install the NDIS 4 driver for
Windows NT 3.51:
1 Insert TokenDisk diskette #2 in the floppy drive.
2 In the Main group, double-click the Control
Panel icon.
3 In the Control Panel group, double-click the
Network icon.
4 In the Network Settings dialog box, click
Add Adapter.
6: I N
NSTALLING A ETWORK
The 3C319 NIC has been installed as described in
Chapter 2.
Plug and Play (PnP) has been manually disabled
as described in
NIC Manually."
The NIC has been manually configured as described
in Chapter 5, "Configuring the NIC
Windows NT 3.51
Windows NT 4.0
D W
RIVER FOR
Chapter 5, "Configuring the
NT
INDOWS
Manually."