Advertisement
STEP 10:
(SEE FIGURE 10)
*
Place screen down into hopper, sliding edge of
screen under one of the clips. Slightly bow the screen
to slide opposite side of the screen under other clip.
CLIPS
STEP 11:
(SEE FIGURE 11)
*
For most vehicles, you can keep the assembled hitch
extension bracket in its default position shown in
figure 11. Attach the spreader hitch to your vehicle
hitch. Check for interference with the spreader directly
behind and out to both sides of the vehicle. Lift the
spreader at each position to make sure there is no
interference with the spreader's flow control, if there
is interference with the rear of the vehicle, assemble
the hitch extension bracket as shown at the bottom
of figure 11. Tighten bolts and nuts when finished.
FIGURE 10
DEFAULT POSITION
FIGURE 11
Call 1-888-578-8388
for missing parts or assembly help
7
DO NOT RETURN TO STORE
Advertisement
