5. Connect the Reed Switch Wire (13) and the two
Extension Wires (41) to the corresponding
wires on
the Console (8).
If your Console (8) has a ground wire, attach it to
the Updght (2) with an M4 x 16ram Screw (34).
Next, attach the Console (8) to the Uprfght (2) with
four #8 x 5/8" Screws (22).
Press the Resistance Knob (9) onto the Resistance
Control (10). Be sure that the mark on the Knob is
correctly aligned.
6.
Finish attaching the Handlebar
(4) to the Upright (2)
with two more M6 x 25ram Hex Head Screws (14)
and two more M6 Split Washers (67). Tighten
ell
four Hex Head Screws.
7.
Attach the SeatBracket (69) to the Seat Frame (3)
with f0ur M!0 x 105mm Button Head Bolts (70), four
M10 Flat Washem (7t'), and four M10 Nylon
Locknuts (72).
8.
Attach the Seat (16) to theseat
Bracket (69) with
.,
four M6 x 16ram Hex Head Screws.(24).
Console
e p
;
Ground
.
Wire
10
14
7O
6;