Load Paper - Epson WorkForce 310 Series Start Here Manual

5

Load paper

1
Open the paper support and pull up the extensions.
2
Pull out the output tray extensions, and raise the stopper.
Note:
If you are using legal-size paper, do not raise the stopper.
3
Squeeze the edge guide and slide it left.
Tip:
If the feeder guard is in the way, flip it forward.
4
Load paper against the right edge and behind the tab, with the printable
side face up.
Note:
Don't load the paper sideways; always load it
short edge first.
5
Slide the edge guide over.