Furuno FCV-1100L Installation Manual page 29

Entering transducer data by transducer model number
Note 1: If you are continuing from paragraph 3.1 go to step 2.
Note 2: If you have already entered transducer settings and to reconfirm them turn on the
power while pressing any key.
1. Turn on the power.
2. Press any key to show the following menu.
Note: XDCR SETTING is set to "XDCR TYPE" at the default setting.
XDCR SELECT INSTALLATION DEMO
XDCR SELECT : XDCR TYPE
[HIGH]
CONNECTION : NOT CONNECTED
FREQ : ---kHz
TRANSDUCER : ----
TAP : --
[LOW]
CONNECTION : NOT CONNECTED
FREQ : --- kHz
TRANSDUCER : ----
TAP : --
POWER REDUCTION : OFF
[-/+]: Change setting, Turn OFF to exit
Installation main menu
3. INITIAL SETTINGS
3-3