Fujitsu PRIMECENTER M1 19-inch Rack User Manual page 48

Cable Inlets and Outlets
Option: Brush for the cat door
A plastic brush can be mounted optionally to the opening (see following figure).
Figure 19: Fastening point for the brush
Ê Screw the brush with one screw onto the rear door.
I
Take care, that the brush is installed horizontal and fasten the screw
with a torque value of 2.5 Nm.
Figure 20: Cables leaving the rack through the cat door
Ê Lead the cables through the cat door as shown in the figure above.
48