Fujitsu PRIMECENTER M1 19-inch Rack User Manual page 26

Rack system for primergy, primequest, bs2000, storage
Table of Contents

Advertisement

Overview
Security
The rack is suitable for installation and operation of rack management systems.
If rack devices with telescopic rails are used, it is necessary for security reasons
to ensure that racks are protected against tilting by means of suitable anti-tilt
protection. Optional available for Fujitsu Racks is an anti-tilt protection that can
be pulled out in case of service.
Standards
Each rack has power connections complying with European and international
standards. There are at least two multiple socket outlet distributions and two
power connections for configuration.
Due to the high leakage current of a fully fitted rack, CEE (IEC60309)
connectors are used. Connection kits for single-phase and three-phase supply
are available, as is a three-phase non-detachable connection. Reliable
grounding in the rack is ensured by the use of IEC60309 connectors.
The power supply components are ideal for these applications and the design
of the power supply ensures reliable and permanent grounding. IEC 60320
connectors are used inside the rack. If grounding in a power supply cable is
interrupted, the leakage current remains limited to < 3,5mA.
Summary of all rack types
Base
Type
unit
16 HU symmetrical
24 HU symmetrical
42 HU symmetrical
24 HU symmetrical
42 HU symmetrical
24 HU asymmetrical 700x1050x1203 mm
42 HU asymmetrical 700x1050x2003 mm
V
CAUTION!
The maximum transport weight may not exceed 1000 kg.
26
Dimensions
(W/D/H)
600x1050x847 mm
600x1050x1203 mm
600x1050x2003 mm
700x1050x1203 mm
700x1050x2003 mm
Max. pay load /
max. dynamic load
320 kg / 380 kg
480 kg / 565 kg
840 kg / 960 kg
480 kg / 590 kg
840 kg / 975 kg
480 kg / 590 kg
840 kg / 995 kg
Net
weight
60 kg
85 kg
120 kg
85 kg
120 kg
85 kg
120 kg

Advertisement

Table of Contents
loading

Table of Contents