Table of Contents
Advertisement
The optimized cable management patented by Fujitsu Technology Solutions is
a major highlight in the asymmetrical PRIMECENTER M1 rack system. The
asymmetrical rack structure with a section for side cable routing reduces the
impairment to the air flow behind the rack devices. Guiding of the cables via
swivel arms on the systems and within the cable conduit permits perfect routing
of the cables, prevents their being stressed below the minimum bending radius,
secures cables against dropping or twisting, and thus permits clean and clear
cabling in the entire rack. This means of cabling, particularly in fully equipped
racks, increases system availability and reduces maintenance and upgrade
times. The offer is supplemented by new symmetrical racks in widths of 600 mm
and 700 mm. The symmetrical 700 mm racks also offer as a special feature up
to 4 slots on the front for the installation of switches or the switch cabling in the
rack.
New rack doors in an attractive design with honeycomb-shaped perforations
also offer (approx. 80% holes) optimal prerequisites for the cooling of high-
performance systems.
Design:
24U and 42U 700 mm x 1050 mm asymmetrical
24U and 42U 700 mm x 1050 mm symmetrical
16U, 24U and 42U 600 mm x 1050 mm symmetrical
Rack height:
Max. rack height approx. 2000 mm (without pallet)
Capacity:
16 to 42 height units plus up to 6 vertical height units (depth of
up to 300 mm incl. cable space)
Additional load of 20 kg per horizontal height unit, 3.5 kg per
vertical height unit, maximum weight up to 1000 kg.
Design doors: One-piece front door and two-piece rear door with high
percentage of holes (approx. 80%) for improved server
cooling. Ergonomic door handles.
Security:
Lockable doors and side panels with a standard key, up to 200
different locking cylinders, electronic access protection
optional.
Optional, telescopic anti-tilt protection. Earthquake security on
request.
Cable
Optimized cable routing solutions for all symmetrical and
management:
asymmetrical rack types. Asymmetrical racks prepared for the
patented lateral cable management. Cabling openings in the
roof of the rack, in the floor group and in the rear door.
Preface
11
Advertisement
Table of Contents
