Pin Assignment Of Internal Ports - Fujitsu Siemens Computers D1961 Technical Manual

Pin assignment of internal ports

The pin assignment of some internal connections is shown in English in the following.
i
Some of the following connectors may be optional!
Front panel
Watch the poling of the LEDs. The positive pole
of the connection cables is often indicated with a
coloured wire.
Connection
Reset
Power On/Off
HD LED
Power On LED Indicates the system state APM or ACPI (see annex, section "APM and ACPI
system status, energy-saving modes").
Password see "Settings with switches and jumpers" chapter
Recovery see "Settings with switches and jumpers" chapter
Speaker 0,5 W at 8 Ohm
Audio In
Pin
1
2
3
4
A26361-D1961-Z120-1-7419, edition 2
Pin assignment of internal ports
Power On/Off
HD-LED
1)
Reset
Recovery Password
1) Cable is not included in the delivery scope.
2) 2-pin or 3-pin connector possible
3) both connector positions possible
Note
Connector for reset switch
Connection for ATX On/Off switch
Indicates HDD (hard disk) activity
Signal
Left CD audio input
CD GND
CD GND
Right CD audio input
3)
Power On
1) 2)
1)
LED
Speaker
1
English - 11
1
2