Settings With Switches And Jumpers - Fujitsu Siemens Computers D1961 Technical Manual

Settings with switches and jumpers

Setting via control-panel plug connector
A
B
C
i
Please pay attention on the exact position of the pin pairs!
Skipping system and BIOS Setup password - pinpair A
Pinpair A enables skipping the system and BIOS Setup password.
System and BIOS Setup password are skipped when the device is switched on and
On / inserted
may be changed.
Off / not inserted
System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - pinpair B
Pinpair B enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).
On / inserted The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
Diskette" restores the System BIOS on the mainboard.
Off / not inserted
Normal operation (default setting).
16 - English
Pin pair A inserted =
1
Skipping system and BIOS Setup password
2
Pin pair B inserted =
1
System BIOS recovery
2
Pin pair C inserted =
1
2
factory setting
A26361-D1961-Z120-1-7419, edition 2