Unpacking And Checking Contents - Craftsman 113.213170 Owner's Manual

unpacking and checking contents
WARNING: TO AVOID INJURY FROM UNEX-
PECTED STARTING OR ELECTRICAL SHOCK, DO
NOT PLUG THE POWER CORD INTO A SOURCE
OF POWER. THIS CORD MUST REMAIN UNPLUG-
GED WHENEVER YOU ARE WORKING ON THE
DRILL PRESS.
Model 113 213170 Drill Press ,s shipped complete m
one box.
1 Unpacking and Check=ng Contents
a. Separate all "loose pads" from packag=ng mate-
rials and check each Item with "Table of Loose
Parts" to make sure all items are accounted for,
before d=scarding any packing material. Some
loose parts are contained inside the belt guard.
Open the belt guard cover to find them.
WARNING: IF ANY PARTS ARE MISSING, DO NOT
ATTEMPT TO ASSEMBLE DRILL PRESS, PLUG IN
THE POWER CORD, OR TURN THE SWITCH ON
UNTIL THE MISSING PARTS ARE OBTAINED AND
ARE INSTALLED CORRECTLY.
2. Remove the protective oil thaE is applied to the
table and column. Use any ordinary household type
grease and spot remover.
WARNING: TO AVOID FIRE OR TOXIC REAC-
TION, NEVER USE GASOLINE, NAPTHA OR
SIMILAR HIGHLY VOLATILE SOLVENTS.
3. Apply a coat of paste wax to the table and column
to prevent rust. Wipe all parts thoroughly with a clean
dry cloth.
TABLE OF LOOSE PARTS
H
Item Description Qty.
A Table ......... 1
B Column Support Asm ........ 1
C Owner's Manual .............. I
O Motor .............. I
E Bag of Loose Parts .......... I
F Base ....................... 1
G Head Asm ............... 1
H Box of Loose Parts .............. 1
F E
D
C