Btr Kit Instructions - Oki B710dn Maintenance Manual

The following document outlines the procedures to install the new BTR assembly
Red circle shows fuser location, BTR assembly located directly under fuser. Note: Before removing
the BTR roller, open the top access cover, and remove print cartridge.
1. Reach inside through the top and squeeze the left side tabs of the BTR and pull out.
2. Now squeeze the right side tabs and pull out.
3. Now grab from the center of the BTR and remove it through the top of the printer.
Final Step:
4. Install the new BTR assembly. When installing the new BTR, the gear should be
on the right side when facing the rear of the printer.

BTR Kit Instructions

7
.