2.7.4
Installing I/O shield and LCD Poster
1.
Install the I/O shield to the
chassis by snaping it in place
from inside.
3.
Thread the LCD Poster cable
through the back I/O shield
opening until the stopper fits the
opening.
5.
Place the LCD Poster on the
chassis or to wherever you like.
2-42
2.
Orient the motherboard and install
it to the chassis. Ensure that the
motherboard external ports fit the
shield openings.
4.
Locate and connect the LCD
Poster cable to the LCD_CON
connector.
Chapter 2: Hardware information