Table of Contents
Advertisement
2.7
EL I/O shield, LCD Poster
and Audio card Installation
2.7.1
EL I/O shield and LCD Poster Installation
1.
Install the EL I/O shield to the
chassis by snaping it in place from
inside.
Be cautious when installing the motherboard. The I/O shield edge springs may
damage the I/O ports.
Locate the P_ELJ1 connector and
3.
connect the shield cable to the
connector in a correct orientation.
5.
Locate and connect the LCD
Poster cable to the LCD_con
connector.
2-24
2.
Orient the motherboard and install
it to the chassis. Make sure that the
motherboard external ports fit the
I/O openings.
4.
Thread the LCD Poster cable
through the back I/O shield opening
until the stopper fits the opening.
6.
Place the LCD Poster on the
chassis or to wherever you like.
Chapter 2: Hardware information
Advertisement
Table of Contents
