Installing I/O Shield And Lcd Poster - Asus Maximus II Gene User Manual

2.7.4

Installing I/O shield and LCD Poster

1. Install the I/O shield to the
chassis by snapping it in place
from inside.
3. Thread the LCD Poster cable
through the back I/O shield
opening until the stopper fits the
opening.
4. Locate and connect the LCD
Poster cable to the LCD_CON
connector.
2-46
2. Orient the motherboard and install
it to the chassis. Ensure that the
motherboard external ports fit the
shield openings.
5. Place the LCD Poster on the
chassis or to wherever you like.
Chapter 2: Hardware information