Bin Setup Menu - Lexmark MS810 User Manual

Understanding the printer menus
Use
Portrait Height
3–14.17 inches
76–360 mm
Feed Direction
Short Edge
Long Edge

Bin Setup menu

Use
Output Bin
Standard Bin
Bin [x]
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type Assignment
To
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US factory default setting. You can increase the
height in 0.01‑inch increments.
• 356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
Specify the feed direction if the paper can be loaded in either direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
To
Specify the default bin.
Notes:
• If multiple bins are assigned the same name, then the
name appears only once in the menu.
•
Standard Bin is the factory default setting.
Specify configuration options for bins.
Notes:
•
Mailbox is the factory default setting. This setting
treats each bin as a separate mailbox.
•
Link configures all available bins as one large bin.
•
Mail Overflow configures each bin as a separate
mailbox.
• Link Optional links all available bins except the
standard bin and only appears when at least two
optional bins are installed.
•
Type Assignment assigns each paper type to a bin or
linked bin set.
•
Bins assigned the same name are automatically
linked unless Link Optional is selected.
199