Troubleshooting
Insert hole punch box
Insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear the message.
For non-touch-screen printer models, press
Insert staple cartridge
Try one or more of the following:
•
Insert a staple cartridge. For more information, see the instruction sheet that came with the supply.
•
Select Continue to clear the message and print without using the staple finisher. For non-touch-screen printer
models, press
to confirm.
Insert Tray [x]
Try one or more of the following:
•
Insert the specified tray into the printer.
•
Cancel the print job.
•
Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.
Install bin [x]
Try one or more of the following:
•
Install the specified bin:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified bin.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
•
Reset active bin
Install Tray [x]
Try one or more of the following:
•
Install the specified tray:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
to confirm.
289