Lexmark MS810 User Manual page 228

Understanding the printer menus
Use
Print Recovery
Page Protect
Off
On
Hibernate Timeout on Connection
Do Not Hibernate
Hibernate
Press Sleep Button
Do nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
Factory Defaults
Do Not Restore
Restore Now
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text 1
To
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
• Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the
entire page prints.
To set the printer to follow the setting of "Hibernate Timeout" even
when an active Ethernet connection exists.
Notes:
•
If "Hibernate Timeout on Connection" is set to "Do Not
Hibernate," then the printer never automatically hibernates.
•
If "Hibernate Timeout on Connection" is set to "Hibernate,"
then the printer follows the value of the "Hibernate
Timeout" setting, except when it is set to Disabled.
•
"Do Not Hibernate" is the factory default setting.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts when you
press and hold the Sleep button.
Note: "Do nothing" is the factory default setting.
Restore the printer settings to the factory default settings.
Notes:
•
Do Not Restore is the factory default setting. Do Not Restore
keeps the user‑defined settings.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads stored
in the flash memory or in the printer hard disk are not
affected.
Select Custom Home Messages on the printer display.
Note: This menu appears only in non‑touch‑screen printer
models.
228