Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings; Loading The 250- Or 550-Sheet Tray - Lexmark MS810 User Manual

Using MS810de
–
If a "JVM Out of Memory" error occurs, then repeat the export process until the configuration file is
saved.
•
To import a configuration from a file, click Import, and then browse to the saved configuration file that was
exported from a previously configured printer.
Notes:
–
Before importing the configuration file, you can choose to preview it first or load it directly.
–
If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information,
see "Avoiding jams" on page 261 and "Storing paper" on page 183.

Setting the paper size and type

From the home screen navigate to:
> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer
menus.
Notes:
•
The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one‑sided printing and
105 x 148 mm (4.13 x 5.83 inches) for two‑sided (duplex) printing.
• The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one‑sided and two‑sided printing.
1
From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select a unit of measure
2
Touch Portrait Width or Portrait Height.
3
Select the width or height, and then touch
Loading the 250‑ or 550‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Pull out the tray.
Notes:
•
When loading folio‑, legal‑, or oficio‑size paper, lift the tray slightly and pull it out.
•
Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
.
95