Preparation Of Chassis - COMFORT-AIRE RAD-101A Owner's Manual

Installation
1, Remove the screws which fasten the cabinet
at both sides and at the ba,ck,
Use a long screwdriver and installing the
screws will b,e easier.
2. S_ide the unit from the cabinet by gripping the
base pan handlUe and
pulling
forward whi_e
bracing the cabinet,
3. Cut the window sash sea_ to the proper
length,
Peel off the backing and attach the Foam-Pe
to the underside of the window sash.
.
5_
Remove the backing from the top, Upper Guide
Fo,am-PE and attach it to the bottom of the
Upper Guide
Attach the Upper Guide onto the top of the
cabinet with 3 Type A screws.
6. Inse_ the Frame Guides into the bottom of
the cabinet,
,
Inse_ the Frame Cu_ain into the Upper Guide
and Frame Guides,
8. Fasten the curtains to the unk with 4 Type
FOamope
(Type A) upper Guide
_rcw
Screw
,(Ty_ A)
Frame ,Gui_s,
(Type A),
Foam-Pe
14 Room, Air Co,nditioner