Preparation Of Chassis - COMFORT-AIRE COMFORT AIRE RAD-183A Owner's Manual

Installation
PREPARATION OF
CHASSIS
i. Remove the screws which fasten the cabinet at
both sides and at the back_
2 Slide the unit out: from the cabinet by gripping
the base pan handle and pulling forward while
bracing the cabinet.
3. Cut the window sash seal to the proper length.
Peel off the backing and attach the Foam-PE to
the underside of the window sash.
Shipping screws
4. Remove the backing from Foam-PE with 3 holes
and attach it to the bo_orn of the Top retainer
bar.
5, Attach the Top retainer bar on the top of the
cabinet with 3 screws (Type A).
Fig. 2
6. Insert the Frame guides into the bottom of the
cabinet,
7 Insert the Frame Curtain into the Top retainer bar
and Frame guides.
8 Fasten the curtains to the unit with 10 screws
(Type A) at both sides,
Foarn-PE
Top relier bar
Top retainer bar
Screw
(Type A)
Screw(TypeA)
"Frameguide Fig. 4
Owner's Manual 13