Window Requirements; Size; Select The Best Location - COMFORT-AIRE RAD-101A Owner's Manual

installation
This room air conditioner is
designed for installation in standa#d
double-hung windows with actual
opening widths from 22" to 36".
The upper and lower window sash
must open s,ufficiently to a!!ow a
clear ve_ical opening of i5" f_m the
bottom of the upper _sh to the
window sty!,
to
1t/4"
WARNING:This product is a WINDOW AIR CONDITIONER. As such,
a standard single-hung
or doiuble-hung
wind_ is required for proper
insta!lation_ Non-window installations, including using sleeves, holes
in walls, and other installations are not recommended..
Select the best location
1. To prevent vibration and noise, make sure
the unit is.install_ securely and firmly
2. Ins,tall the unit where the sunlight does not / ,ing
shine, directly on the unit. /
C_led air _ _ Heat
3, The outside d t!he cabinet must extend R'_._ _ radiation
outward for at least ii i and there should II
be no obs_cles., s.uch as a fence o,r walll, " II ,=,= i
within 20" from the back of the cabinet _ _ _t-!__i_ ........... ....
because it will prevent heat radiation of the _/ [1 -"_'] AboutI/Z' ,
condenser.. _ /_ over 2o'
Restriction of outside air wili greatly r_uce
the c_ling efficiency d the air conditioner.
Fence
i
All side louvers of the cabinet must remain expos_ to the outside of the
4. Install the unit a li_le slanted so the back is
slightly
lower than the front(about V2").
This will force _ndensed water to flow to, the outside.
5. install the unit with the _ttom a_ut 30"-"60" a_ve the fl_r level.
Owner_Manuaf 13