Chapter2 Connecting Scansnap - Fujitsu SCANSNAP! FI-4110EOX2 Operator's Manual

Chapter2
CONNECTING ScanSnap!
This chapter describes how to connect ScanSnap! product to your personal computer.
Before you connect ScanSnap! scanner, install the supplied programs (Adobe
CardMinder and ScanSnap! Driver) on your personal computer.
First, install ScanSnap! Driver, and then connect ScanSnap! to your personal
ATTENTION
computer.
If you connect ScanSnap! before installing ScanSnap! Driver, ScanSnap! will
not operate normally.
Also, if an older version of ScanSnap! Driver is installed on the personal com-
puter you are using, first uninstall the older version, restart your personal com-
puter, and install the latest version of ScanSnap! Driver.
* If you have connected ScanSnap! beforehand, the "Found New Hardware
For details on access space required when installing your scanner, refer to Appendix "Installation
Specifications" (page. 75).
In this chapter, the following abbreviations mean the following:
®
Windows 98
®
Windows Me
®
Windows 2000 : Microsoft
®
Windows XP
2.1 Installing ScanSnap!............................................................................................... 6
2.2 Connecting Your Computer to ScanSnap! ......................................................... 15
Wizard" (the screen title differs slightly according to the OS running on your
personal computer) screen is displayed. If this screen is displayed, click the
[Cancel] button to close the Wizard screen, and first install ScanSnap! Driver.
®
: Microsoft Windows
®
: Microsoft Windows
®
Windows
®
: Microsoft Windows
®
Microsoft Windows
ScanSnap! fi-4110EOX2 Operator's Guide
®
98 operating system operating system
®
Millennium Edition operating system
®
2000 Professional operating system
®
XP Professional operating system,
®
XP Home Edition operating system
® ®
Acrobat ,
5
2