Fujitsu SCANSNAP! FI-4110EOX2 Operator's Manual page 14

Do not install in locations subject to oil smoke, steam, humidity,
and dust.
Do not use the scanner if you smell strange odor.
Turn the scanner OFF if it is damaged.
Do not put liquids inside the scanner.
xii
Do not install the scanner in locations subject to oil smoke, steam, humidity, and
dust. Doing so might cause a fire or electric shock.
If you detect heat coming from the device or detect other problems such as
smoke, strange smells or noises, immediately turn off the scanner and then
disconnect its power plug.
Make sure that the smoking has stopped, and then contact the store where you
bought the scanner or an authorized FUJITSU scanner service provider.
If the scanner is damaged for any reason, turn off the scanner and unplug the
power cable before contacting the store where you purchased the scanner.
Do not insert or drop metal objects in to the scanner.
Do not scan wet documents or documents with paper clips or staples.
Do not splash or allow the scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner,
immediately turn off the scanner and disconnect the power plug from the power
outlet, then contact the store where you bought the scanner or the Maintenance
Service Center.
Pay particular attention to this warning in households where there are small chil-
dren.