Fujitsu SCANSNAP! FI-4110EOX2 Operator's Manual page 50

HINT
<To remove an application>
1 Select the application you want to remove in the "Add or remove application"
2 The confirmation screen will be displayed twice. In either case, click the [Yes] but-
3 Confirm that the application has been removed, and then click the [Close] button.
<To change settings>
1 Select the application whose settings you want to change in the "Add or remove
2 The "Setting of additional application" screen is dislpayed. Change the desired
3 When you have finished the above setting, click the [OK] button.
4 The "Add or remove application" screen is displayed, and the settings are changed.
34
Select the application that can be executed on a file of the following specified
format as the application to add.
JPEG (*.jpg), PDF (*.pdf)
Scanned images cannot be displayed properly unless these file formats are
supported.
This can be confirmed by the following method:
<Example: to confirm whether or not the application to add can be executed on
a specified a JPEG format file>
1. Create a shortcut for the application you want to add.
2. Drag-and-drop any file in JPEG format (*.jpg) on top of the shortcut.
⇒
If the application starts up and the file opens, then this means that
JPEG format files can be run.
However, certain applications that satisfy the adove requirements may not work
properly. In that case, start up the application first and then open the files cre-
ated by ScanSnap!.
screen, and click the [Remove] button.
ton.
application" screen, and click the [Change...] button.
items.
Click the [Close] button to close the screen.