Advertisement
Quick Links
24V DRIVE, 2-COLOR THERMAL PRINTER
3" TYPE MECHANISM
FTP-632MCL101/102/353/354
OVERVIEW
New 2-color printer (blue/black or red/black) joins FTP-602
Series. The series consists of 24V battery drive compact thermal
printers which can print at high speed.
This series is suitable as built-in printer for a variety of
applications, such as portable terminals, POS terminals, ticket
machines, coupon machines, label printers, banking machines,
measuring devices, medical equipment, etc.
HIGHLIGHTS
• 2 Color printing
It can print 2 colors: blue/ black or red/black
• High speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control (at monochromatic
printing).
Speed of 2-color printing:
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Easy head access
It is designed for easy head cleaning and head replace-
ment.
• Two paper paths
Front and bottom paper insertion is available.
1
- blue and red: 80 mm/s (460
dotlines/s) maximum
- monochromatic print: 40mm/s
maximum
FTP-632MCL101
FTP-632MCL353
FTP-622DCL/DSL4xx
Advertisement
Related Manuals for Fujitsu FTP-632MCL101
Summary of Contents for Fujitsu FTP-632MCL101
- Page 1 • 2 Color printing It can print 2 colors: blue/ black or red/black • High speed printing It can print at 100 mm/s (800 dotlines/s) by using Fujitsu Components' unique head drive control (at monochromatic printing). Speed of 2-color printing:...
-
Page 2: Part Numbers
FTP-632MCL101/102/353/354 PART NUMBERS , c i , i j e l l *1: FTP-622DCL411 is ANK supported only *2: FTP-622DSL438 has FLASH memory and can print high speed images *3: Supports Kanji and parallel and serial interfaces GENERAL SPECIFICATIONS Item Specifications Part number FTP-632MCL101/102... - Page 3 Printer Mechanism Approximately 94g Mechanism with cutter Approximately 340g Life Head Pulse durability: 1 pulse/dot (using Fujitsu Components' standard driving method) Wear resistance: 50 km (at 25% print ratio) Cutter ---- 500,000 times minimum Operating temperature +5 to +40 C (Guarantee, but can operate between 0 C to +50 C)
- Page 4 FTP-632MCL101/102/353/354 FUNCTION ITEM ITEM Test printing Motor power save Paper-out detection Mark detection Paper near end detection MCU trouble detection Head-up detection Power on/off sequence protection Abnormal temp. of thermal head detection Motor protection Blown fuse detection Hardware timer Abnormal voltage detection of head DIMENSIONS 1.
- Page 5 FTP-632MCL101/102/353/354 Interface board Unit: mm...
- Page 6 FTP-632MCL101/102/353/354 CONNECTOR FOR THERMAL HEAD 1. Thermal Head Head side : IL-FPC-28CLIP (JAE) Board side : 52045 (Molex) or equivalent *1: Symbol: " " means a negative logic signal Thermal head heat sink Head up level Motor 1, 2, 3, ........15, 16 Connector Pin No.
- Page 7 Tel: (1-408) 745-4900 Tel: (65) 6375-8560 Fax: (1-408) 745-4970 Fax: (65) 6273-3021 Email: marcom@fcai.fujitsu.com Email: fcal@fcal.fujitsu.com Web: www.fcai.fujitsu.com www.fcal.fujitsu.com © 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 06/22/2004.