Table 6 Command List - Fluke 1502A User Manual

Table 6 Command List

Command
Measurement Commands
T
F[ETCH?]
SA[=[[[hh:]mm:]ss]
U=C|F|K|O
ST[=ON/OF]
CL[=hh:mm:ss]
Probe Characterization Commands
PR[=90|68|R|S]
R0[=<value>]
AL[=<value>]
DE[=<value>]
BE[=<value>]
A4[=<value>]
B4[=<value>]
C4[=<value>]
A n [=<value>]
B n [=<value>]
C n [=<value>]
D6[=<value>]
SC[=68/90]
CO=<value>
Sample Parameter Commands
FI[=<value>]
CU[=<value>]
PS[=<value.]
Communication parameter commands
DU[=F/H]
LF[=ON/OF]
Description
read measurement (includes label, unit, and time)
read measurement value (SCPI compatible)
read [or set] serial sample period
select units
read [or set] the time stamp
read [or set] the system clock
read [or select] the characterization type
read [or set] R0 or R(0.01°C) depending on the selected characterization
read [or set] for the Callendar-Van Dusen or IPTS-68 characterization
read [or set] for the Callendar-Van Dusen or IPTS-68 characterization
red [or set] for the Callendar-Van Dusen characterization
read [or set] a for the ITS-90 or IPTS-68 characterization
4
read [or set] b for the ITS-90 characterization
4
read [or set] c for the IPTS-68 characterization
4
read [or set] a , a , a , a , a , or a
6 7 8 9 10
read [or set] b , b , b , or b for the ITS-90 characterization
6 7 8 9
read [or set] c or c for the ITS-90 characterization
6 7
read [or set] d for the ITS-90 characterization
6
read [or set] IPTS-68 scale conversion
test resistance to temperature conversion
read [or set] filter time constant
read [or set] probe current
read [or set] the power saver period
read [or set] serial sample duplex mode
read [or set] serial linefeed
7 Digital Communications Interface
for the ITS-90 characterization
11
Remote Commands
27