Cr_Image Command; Cr_Imggmd Command; Cr_Advcol Command - Sanyo PLC-XF1000 - 12000 Lumens Manual

PLC-XF1000 Expand Serial Command Functional Specifications

9.4.17 CR_IMAGE Command

Command "CR_IMAGE" [CR]
Get image setting status.
Details The Required data "CUSTOM1" – "CUSTOM10" corresponds to "Image1" –
"Image10" displayed when selecting Image on OSD Menu.
Acceptable
%1
Response
Unacceptable

9.4.18 CR_IMGGMD Command

Command "CR_IMGGMD" [CR]
Details Get setting status of Standard/Real/Cinema in Image Gamma
Acceptable
Response
%1
Unacceptable

9.4.19 CR_ADVCOL Command

Command "CR_ADVCOL" [CR]
Details Get setting status of Advanced color
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"STAND" ---------------------------------- Standard
"REAL" ----------------------------------- Real
"CINEMA" --------------------------------- Cinema
"CUSTOM1" ------------------------------- "Image1"
"CUSTOM2" ------------------------------- "Image2"
"CUSTOM3" ------------------------------- "Image3"
"CUSTOM4" ------------------------------- "Image4"
"CUSTOM5" ------------------------------- "Image5"
"CUSTOM6" ------------------------------- "Image6"
"CUSTOM7" ------------------------------- "Image7"
"CUSTOM8" ------------------------------- "Image8"
"CUSTOM9" ------------------------------- "Image9"
"CUSTOM10" ----------------------------- "Image10"
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"STD" ------------------------------ Standard
"REL" ------------------------------ Real
"CNM" ----------------------------- Cinema
"?" [CR]
"000_%1" [CR]
"AUTO" ------------------ Operate Advanced color with Auto
"OFF" --------------- Set Advanced color OFF
"?" [CR]
47/72