PLC-XF1000 Expand Serial Command Functional Specifications
8.4.17 CF_ADVCOL Command
Command
"CF_ADVCOL_%1" [CR]
"AUTO" -------------- Set Advanced color to Auto
"OFF" ----------------- Set Advanced color OFF.
%1
" UP" ------------------ Switch setting forward direction (OFF→Auto→OFF→Auto)
" DN" ------------------ Switch setting backward direction (OFF→Auto→OFF→Auto)
*"UP" and "DN" are exactly same operation.
Set Advanced color mode (Available only in the normal Power ON status)
The value set by this command is not stored in the projector's memory. Therefore,
Details
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
24/72