Completing The Parts Replacement - Lenovo ThinkStation E31 Hardware Maintenance Manual

Hardware maintenance manual (hmm) (june 2012) - thinkstation e31 (type 2551, 2552, 2553, 2554, 2555)
Hide thumbs Also See for ThinkStation E31:
Table of Contents

Advertisement

5. Carefully press the other side of the socket cover downwards until the socket cover snaps into place.
Figure 104. Securing the socket cover
6. Carefully check the four corners of the socket cover to make sure that the cover is secured in the
microprocessor socket.
7. Close the microprocessor retainer and then lower the lever to secure the retainer. Ensure the lever
is locked into position.
8. Follow any additional instructions included with the replacement part you received.

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6 "Using the Setup Utility program" on page 53.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See "Locating major FRUs and CRUs" on page 79 for the locations of various
components in your computer.
2. If you have removed the front bezel, reinstall it. To reinstall the front bezel, align the three tabs on
the front bezel with the corresponding holes in the chassis and pivot the front bezel inwards until
it snaps into position.
3. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference with closing the computer cover.
4. Lower the optical drive bay.
5. Close the computer cover.
6. If there is an integrated cable lock available, lock the computer.
7. Reconnect the external cables and power cords to the computer. See "Locating connectors on the
rear of your computer" on page 78.
8. To update your configuration, refer to Chapter 6 "Using the Setup Utility program" on page 53.
Note: In most areas of the world, Lenovo requires the return of the defective Field Replaceable Units (FRUs).
Information about this will come with the new FRUs or will come a few days after you receive the new FRUs.
.
Chapter 11
Replacing FRUs (for machine types: 3688, 3690, 3691, 3693, and 3695)
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents